

Industrial Cellular Router Ursalink UR75
Features
Industrial Wi-Fi solution, strong CPU and big memory, SSD/Micro SD card available to support further development and customizing requirements
Gigabit Ethernet is applied to all models of Ursalink routers for lightning transmission of data
Dual SIM cards for backup between multiple carrier networking and global 2G/3G/LTE options make it easy to get connected
Embed Ursalink SDK (Python 2.7/C) for secondary development
Flexible interface design provides users with different connection modules like Ethernet, I/O, serial port, Wi-Fi, GPS for connecting diverse field assets
Rugged enclosure, optimized for DIN rail or shelf mounting
3 years warranty
Specifications
Cellular Interfaces
Connectors
SIM Slots
2 × 50 Ω SMA (Center PIN: Female)
2
Wi-Fi Interface (Optional Add-on)
Connectors
Standards
Tx Power
Rx Sensitivity
Modes
Security
2 × 50 Ω SMA (Center PIN: Female)
IEEE 802.11a/b/g/n (Optional Selection: IEEE 802.11ac)
802.11a: 5 dBm (54 Mbps)
802.11bg: 18 dBm (54 Mbps)
802.11n: 21–14 dBm (2.4 GHz MCS0–MCS7)
802.11n: 19–14 dBm (5 GHz MCS0–MCS7)
802.11ac: 19–13 dBm (MCS0–MCS9)
802.11a: 15 dBm (54 Mbps)
802.11bg: -75 dBm (54 Mbps)
802.11n: -92–-73 dBm (2.4 GHz MCS0–MCS7)
802.11n: -93–-72 dBm (5 GHz MCS0–MCS7)
802.11ac: -93–-62 dBm (MCS0–MCS9)
Access point, support for multiple SSID, support AP and Client mode
WPA/WPA2 authentication, WEP/TKIP/AES encryption, Shared keys, support for open systems
Hardware System
CPU
Memory
Storage
800 MHz, 64-bit ARM Cortex-A53
64 MB Flash, 256 MB DDR3 RAM
1 × Micro SD, 1 × M.2 slot supports SATA M.2 SSD (22 x 42 mm) up to 512 GB
Ethernet Interface
Ports
Physical Layer
Data Rate
Interface
Mode
5 × RJ-45
10/100/1000 Base-T (IEEE 802.3)
10/100/1000 Mbps (Auto-Sensing)
Auto MDI/MDIX
Full or half duplex (Auto-Sensing)
Serial Interface
Ports
Connector
Baud Rate
(Optional Selection: 1 × RS232 + 1 × RS485 or 2 × RS232 or 2 × RS485)
Terminal block
300bps to 230400bps
IO (Optional Add-on)
Connector
Digital
(4) pin screw down terminal block
2×DI + 2×DO
GPS (Optional Add-on)
Connector
Sensitivity
Position Accuracy
Protocols
1 × 50 Ω SMA (Center PIN: SMA Female)
-167dBm@Tracking, -149dBm@Acquisition, -161dBm@Re-acquisition
<2.5m CEP
NMEA 0183, PMTK
Software
Network Protocols
VPN Tunnel
Access Authentication
Firewall
Management
AAA
Multilevel Authority
Reliability
Serial Port
PPP, PPPoE, SNMP v1/v2c/v3, TCP, UDP, DHCP, RIPv1/v2, OSPF, DDNS, VRRP, HTTP, HTTPS, DNS, ARP, QOS, SNTP, Telnet, VLAN, SSH, etc.
DMVPN/IPsec/OpenVPN/PPTP/L2TP/GRE
CHAP/PAP/MS-CHAP/MS-CHAPV2
ACL/DMZ/Port Mapping/MAC Binding
Web, CLI, SMS, On-demand dial up
Radius, TACACS+, LDAP, Local Authentication
Multiple Levels of User Authority
VRRP,WAN Link Backup, Automatic Recover from Failure
Transparent (TCP Client/Server, UDP), Modbus Gateway (Modbus RTU to Modbus TCP)
Power Supply and Consumption
Connector
Input Voltage
Power Consumption
2-pin with 5.08 mm terminal block
9-48 VDC
Typical 2.8 W (Max 5.5 W)
Physical Characteristics
Ingress Protection
Housing & Weight
Dimensions
Mounting
IP30
Metal, 492 g (1.08 lb)
132 x 103.8 x 45 mm (5.20 x 4.09 x 1.77 in)
Desktop, Wall or DIN Rail Mounting
Others
Reset Button
LED Indicators
Built-in
Certifications
EMC
1 × RESET
1 × POWER, 1 × WLAN, 1 × STATUS, 1 × VPN, 1 × SIM1, 1 × SIM2, 3 × Signal Strength
Watchdog, RTC, Timer
RoHS, CE, FCC
ESD Electrostatic Discharge Immunity: EN61000-4-2,level 4
RFI Radio Frequency Immunity: EN61000-4-3, level 4
EFT Electrical Fast Transient/Burst Immunity: EN61000-4-4, level 4
Surge Immunity: EN61000-4-5, level 3
Immunity to Conducted Disturbances: EN61000-4-6, level 4
Power Frequency Magnetic Field Immunity: EN61000-4-8, horizontal/vertical 400A/m (>level 4)
Environmental
Operating Temperature
Storage Temperature
Ethernet Isolation
Relative Humidity
-40°C to +70°C (-40℉ to +158℉) Reduced Cellular Performance Above 60°C
-40°C to +85°C (-40℉ to +185℉)
1.5 kV RMS
0% to 95% (non-condensing) at 25°C/77℉